Abrasion phenomena in twill tencel fabric

The abrasion characteristics of Tencel fabrics were evaluated by Martindale abrasion and laundering, and the breakdown mechanism of fibers was surveyed by scanning electron microscopy. The fabric was subjected to pad‐dry‐cure treatment with two different types of modified dimethyloldihydroxyethylene urea resins (Reaktant DH and Reaktant FC). Although the degree of dry abrasion varied with different resins, the damage exhibited by individual fibers differed little from untreated to resin‐treated; the major mechanism of abrasion was through friction, and the mechanism of fiber failure was multiple splitting and transverse cracking. In untreated Tencel, the characteristic feature of wet abrasion was massive fibrillation, and in crosslinked fabrics, the wet abrasion mechanism was through fiber slippage and slicing action, although in the Reaktant FC‐treated fabric, the wet abrasion mechanism was more through slicing than through fiber splitting. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1391–1398, 2006     

先进电子化政府基本模式及实现

电子化政府是运用信息技术创新政府服务的整合概念。建构电子政府已经成为世界范围内政府再造的新趋势。这里讨论了电子化政府基本模式及规划的内容和特点,并具体提出实现的模式、技术路径及方法。     

Lattice Distortion Analysis Directly from High Resolution Transmission Electron Microscopy Images—the LADIA Program Package

Direct strain mapping from high resolution transmission electron microscopy images is possible for coherent structures.At proper imaging conditions the intensity peaks in the image have a constant spatial relationship with the projected atom columns.This allows the determination of the geometry of the projected unit cell without comparison with image simulations.The fast procedure is particularly suited for the analysis of large areas.The software package LADIA is written in the PV-WAVE code and provides all necessary tools for image processing and analysis.Image iintensity peaks are determined by a cross-correlation technique,which avoids problems from noise in the low spatial frequency renage.The lower limit of strain that can be detected at a sampling rate of 44 pixels/nm is ≈2%.     

束流测量中的工频陷波器

提出了一种应用于电子束曝光机束流测量中的自动跟踪工频陷波器，给出电路结构，基于对其工作原理的分析，介绍了提高陷波器跟踪精度的设计要点及调试方法。     

透射型定时探测器

本文介绍了由微道板构成的透射型定时探测器,得到的飞行时间系统的时间分辨为280ps。并对进一步改善时间特性作了讨论。     

X射线三轴晶衍射法测量半绝缘GaAs单晶的化学配比

采用X射线三轴晶衍射法,根据As间隙原子对作为过量As在GaAs单晶材料中存在的主要形式的模型,可以无损、高精度测量半绝缘GaAs单晶的化学配比.并探讨了引起晶格变化的原因及其与熔体组分的关系,对于制备高质量GaAs单晶及其光电器件具有重要的意义.     

UV-LIGA深度光刻机平滑衍射技术研究

UV-LIGA深度光刻技术是加工微型机电系统的一项重要的微细加工技术。介绍了一种平滑衍射效应的位错强度叠加原理，它采用了蝇眼积分透镜去平滑衍射，并模拟数值计算了硅片表面的光强分布，最后给出了光刻结果。     

X射线衍射线形Fourier变换

采用计算机辅助实验技术，研究X射线衍射线开在仪器宽化修正过程中Fourier系数变化的规律及其影响，结果表明，只要实测线形接近Gauss 分布，Fourier变换就会导致弯勾效应；Forier变换可引起真实线形的尾部波动及大于实际值的宽化，引入边界条件可予以消除，Kα双线形经过Fourier变换后，Fourier纱数与真实Fourier系数存在着一定的差异。通过真实线形的Fourier变换可以修正。     

Preparation and characterization of organic-inorganic poly(ethylene glycol)/WS2 nanocomposite

Layered nanocomposite PEG/WS₂, intercalating oligomeric poly(ethylene glycol) (PEG6000) into the tungsten disulfide host galleries, was synthesized using the exfoliation-adsorption technique. X-ray diffraction revealed that the intercalated oligomer within the host galleries is in a double-layer arrangement with an interlayer expansion of about 8.8 Å. The optimum conditions were explored to prepare the single-phase product with a composition of Li_0.12(PEG)_1.51WS₂. Thermal analyses suggested that the resulting material shows good thermal stability, with the decomposition of the interacted oligomeric chains within the disulfide galleries occurring at around 258 °C. Despite high conductivity of the host material, those of the PEG/WS₂ nanocomposite were found to be high in the order of 1 × 10⁻² S cm⁻¹ at ambient temperature, resulted from the host guest-host charge transfers.